7041 | White Ink | Paramount White | 1 Quart

Price:

$44.00 (inc Tax) $44.00 (exc Tax)

Product Description

FEATURES

• 7041LF* Paramount Ultra Low Bleed (LB), Phthalate Free (PF) White is a low fusing, fast flashing, low tack, high pigment plastisol based screen printing ink.

• 7041LF has a very creamy viscosity and is very easy to print. As a result, less pressure is needed to print 7041LF through the screen.

• 7041LF contains no bleaching agents and offers superior performance relative to other low bleed inks.

RECOMMENDED FABRICS

Cotton/polyester blends, polyester and 100% cotton. Always test print fabric for possible dye migration before beginning a production run.

SCREEN MESH AND EMULSION

60-305 t/in or 24-120 t/cm Monofilament

Use 110-305 t/cm or 43-120 t/cm Monofilament for under basing

Any direct or indirect lacquer resistant emulsion. Use 35 to 70 micron capillary film for best results.

SPOT FLASHING

This product will spot dry, with very low after flash tack, in 2 to 8 seconds depending on the spot dryer used. In some cases, you may have to lower the heat of the spot cure unit because too much heat may actually make the ink tacky. When you spot dry, you are only partially fusing or gelling the surface of the ink. The ink should just be dry to the touch, with no lift off, but not be totally fused. Totally fusing the underprint white may cause inner coat adhesion problems with the inks printed on top of the white ink. Final fusing or curing should occur in the dryer.

7041 Paramount White ink

7041 Ultra Low-Bleed Paramount White offers superior bleed resistance, outstanding print performance, very fast, excellent opacity and a soft hand. It is ideal for high and low mesh counts and unlike other competitive inks, 7041 Paramount White contains no bleaching agents and is non-phthalate.

•Ultra Low Bleed
•Non-Phthalate (NP)
•Excellent opacity
•Very Fast Flash
•Low cure (300°-325°F or 140°-160°C)
•Ideal for low and high mesh counts
•No Bleaching Agents
•Creamy Viscosity