International Coatings' Centris™ 7600 line of screen printing inks use advanced Non-Phthalate formulations that result in smooth printing inks with all the characteristics our printers have come to expect.

FEATURES
• Ready for use, High Performance plastisol
formulated for Ultra High speed automatic printing.
• Very creamy and short bodied, with low tack and
for ease of printing, a greatly improved shear.
• Well suited for high definition and resolution, fine
detail and halftone printing.
• Faster production speeds with less pressure. Can
be printed through finer mesh counts for faster
production speeds with less pressure.

RECOMMENDED FABRICS Light colored 100% cotton or cotton/polyester blends. Use an underbase for printing dark fabrics.

INK APPLICATION Colors should be printed without any modifications. If thinning is required, use 1099LF LB Lo-Bleed Reducer (1% to 3% by weight).

SCREEN MESH AND EMULSION 110 to 305 t/in 43 to 120 t/cm Monofilament Any direct or indirect lacquer resistant emulsion. Use 35 to 70 micron capillary film for best results.

SQUEEGEE 60-70 Durometer: Sharp Edge 60-90-60 or 70-90-70 Triple Durometer: Sharp Edge

CURE TEMPERATURE 325° (163°C) Entire ink film. Test dryer temperatures and wash test printed product before and during a production run.

CLEAN-UP Mineral Spirits or any environmentally friendly plastisol screen wash.

PRODUCT PACKAGING 1 Gallon, 5 Gallon, or 30 Gallon Containers.

STORAGE OF INK CONTAINERS Recommend storage at 65°F to 90°F (18°C to 32°C). Avoid storage in direct sunlight. Keep containers well sealed.